Adhesivos Soltec SL has been granted ETA 24/0066 for its SOLTEC PANEL-FIX kit used for the adhesion of façade panels.
The SOLTEC PANEL-FIX kit consists of SOLTEC PANEL-FIX polymer adhesive and SOLTEC PANEL-FIX 451SW primer, and is used for the adhesion of opaque façade cladding panels on the aluminium profiles of the substructure.
MEASUREMENT & VERIFICATION (PM&VL 7)
Product test:
Membrane TRASPIR EVO UV 115
Mechanical, durability, vibroacoustic, thermal, and microclimate comfort tests of envelope products and their connectors. Mechanical, vibroacoustic, thermal, and structural (scanning and optical microscope, spectrometer) tests are used for ageing diagnosis.
01 November, 2024
MEASUREMENT & VERIFICATION (PM&VL 7)
Product test:
RC1: TRASPIR EVO 160 and SMART BAND
RC2: TRASPIR EVO UV 115 and FLEXI BAND UV
Mechanical, durability, vibroacoustic, thermal, and microclimate comfort tests of envelope products and their connectors. Mechanical, vibroacoustic, thermal, and structural (scanning and optical microscope, spectrofotometr) tests are used for ageing diagnosis.
01 November, 2024
MEASUREMENT & VERIFICATION (PM&VL 2)
Test facade built to test the behaviour of the hygrovariable membrane and installation methods for capacitive sensors
01 August, 2023
MEASUREMENT & VERIFICATION (PM&VL 6)
Tested Products:
CLIMA CONTROL 80
BYTUM BASE 2500
BYTUM SLATE 3500
TRASPIR EVO 160
TRASPIR WELD EVO 360
GROUND BAND
01 September, 2024
ABOUT EXPERIMENT PARTNER AND PRODUCT
The tested solution is an innovative multifunctional façade system integrating IoT, heat pumps, automatic blinds and windows to ensure indoor comfort and energy efficiency.
01 September, 2024
The company FlexoFibers Europa SL has obtained the ETA 23/0933 for its steel fibers FLEXOFIBER® FX from the recycling of used tyres, for reinforcing mortars and concrete.
FLEXOFIBER® FX-20 and FLEXOFIBER® FX-25 steel fibers are obtained from recycled tyres (cold drawn filaments with high tensile strength). FLEXOFIBERS selects the fibers, eliminates excess rubber and classifies the fibers by size (length and diameter), to generate two commercial products for reinforcing mortars and concrete:
PM&VL 6
Multifunctional, multilayer façade systems
PM&VL6 offers a comprehensive characterization of building envelope components, thanks to its two infrastructures: the Materials & Structures Laboratory (M&S Lab, mechanical characterization) and the BEEpilot (thermal, hygrothermal, air quality and airtightness performances).
Overview
Health
Hygiene, health, environment
30 July, 2023
Thermal conductivity of a material is a basic feature of thermal insulation. The test is conducted using the FOX 314 Lasercomp Inc. device, with a measurement range of 0.01 - 0.2 W/mK. Depending on the type of material, the tests are conducted in accordance with:
EN 12664: 2001 Thermal properties of building materials and products - Determination of thermal resistance using the shielded hotplate and heat flow meter methods - Dry and moist products with medium and low thermal resistance.